top of page

 

Production class engine

 

Engine prepared with steel liners, forged mahle pistons with standard detail and compression ratio, balanced crank, shot peened standard rods, oil pump built with En24 gears, trap door sump, head rebuilt with standard valves, seats cut, guides replaced, Elise Racing cams, casting marks cleaned in ports. This type of engine rebuild suits Elise Race engines, Exige Race engines and 211 Race engines. This is a great engine spec to replace your damaged standard engine.

 

Power198 bhp.  

Cost £4600 + VAT.

 

 

 

2.0 Litre atmo Throttle bodies

 

Steel lined block, steel rods, forged pistons, steel stroker crank, En24 Oil gears, studded block, ported cylinder head, Elise Racing camshafts, Elise Racing rockers, Elise Racing throttle bodies, steel valves, race specification valve train.

Available with Elise Racing revised belt route system for complex installations. This type of engine rebuild suits Elise Race engines, Exige Race engines and 211 Race engines. This type of engine will amaze you and will leave supercharged engines for dead and will not suffer the heat soak problems that they will experience.
 

 

260 bhp @ 8750 rpm

(requires H Pro Ecu)

Cost £9600 plus VAT

 

 

Supercharged & Turbo Race Engine

 

Available in 1.8 or 2.0 Litre

Thick walled steel liners, Elise Racing large diameter stud system, balanced crank, forged 9.0 compression ratio pistons, block prepared for boring with deck plate, trap door sump or dry sump, En24 oil gears, ported cylinder head, Elise Racing forced induction cam profiles, Elise Racing rocker system, valves, valve springs, retainers dependent on specification of supercharger or turbo installation this Engine will produce 400 bhp with capable supercharger and turbo form with a GTX35R turbo the engine will produce over 500 bhp in reliable race specification.

 

 

- Requires H Pro Ecu

- Requires map sensor, injectors, wide band sensor

- Requires suitable supercharger or turbo.

Cost of engine without ancillaries in wet sump £7800 + VAT

 

 

 

Race 1.8 Litre atmo engine rebuild

 

Steel lined Elise Racing block, steel rods, forged pistons, balanced crank, ACL bearings, studded block for mains and cylinder head, En24 Oil pump gears, ported cylinder head, Elise Racing camshafts and Elise Racing rocker system, Elise Racing throttle bodies, replaced valves, springs and retainers. This type of engine rebuild suits Elise Race engines, Exige Race engines and 211 Race engines. Torque is greatly improved and the overall driving experience is transformed.

 

 

235 bhp @ 8500 rpm 

(Requires H pro Ecu) 

Cost £7500 + VAT

 

 

 

 

bottom of page